RibLoc U Plus Chest Wall Plating System

The U Plus system provides a solution for rib fracture repair that is stable, efficient, versatile, and customizable to each patient and situation.

Product Overview

Acumed has developed U-shaped plate technology to provide stability with anterior and posterior locking screws. The RibLoc U Plus Chest Wall Plating System offers straightforward, color-coded instrumentation for ease of use. The RibLoc U Plus 90 Instrumentation, a low-profile system, provides power for limited access areas to ensure efficiency in the operating room.

If you’d like to learn more about the RibLoc U Plus rib plating system, click this link to head to the Acumed website, or give us a call on 1800 225 065 or email info@medopt.com.au.

Indications for Use

The Acumed RibLoc U Plus Chest Wall Plating System is intended to stabilize and provide fixation for fractures, fusions, and osteotomies of the ribs, and for reconstructions of the chest wall and sternum.

U Plus Chest Wall Plating System

The U Plus system provides a solution for rib fracture repair that is stable, efficient, versatile, and customizable to each patient and situation.

  • U-clips compress to match the rib thickness
  • Plates address diverse fracture patterns
  • Custom bending instruments
  • Multipurpose instrumentation

 

Custom Fit to the Rib

The RibLoc U Plus plate was designed to be customizable to the individual patient. The plates range in length from 50 mm – 215 mm, which allows the surgeon to address a broad range of fracture patterns.

The advanced design of the plate offers a compressible U-clip to fit to a broad range of rib thicknesses (6 mm – 14 mm).

 

 

U Plus Placement on Rib

The U-shape design of the U Plus plate aids in consistent and straightforward placement through the thickest portion of the rib while avoiding the neurovascular bundle.

A biomechanical study was performed using cadaver ribs plated with a 4.6cm long RibLoc plate and 4 screws. It was superior in durability to an anterior plate of over twice the length and 6 screws after only 50,000 breathing cycles (typically two days of breathing). This was evaluated based on stiffness loss, as shown in the graph. Additionally, the reduced length of the RibLoc plate may facilitate a less invasive technique.

Anterior and Posterior Locking

The U-clips are designed to minimize stress on the rib by distributing physiologic loads over a greater surface area. Once the screws are engaged and fixed to the cortices of the bone, the plate locks both anteriorly and posteriorly. An additional benefit to the U-clip design is that fewer screws are needed to provide an anchor to the bone, reducing the degree of dissection needed on the rib itself.

Plate Variety

The RibLoc U Plus system offers U-shaped plates for rib fixation as well as a straight plate to stabilize sternum fractures.

The U-shaped plates are available in 55mm, 75mm, 115mm, and 215mm. The straight plate has a length of 126mm. All plates have been designed to work with existing RibLoc U Plus and U Plus Instrumentation.

Straightforward Installation

With the use of a hex driver and drill bit, a rib plate installation may be completed in as few as three steps for a simple fracture using the U Plus plate, Primary Guide, and screws.

 

Dual-Locking Screws

The 2.7 mm dual-threaded screws are provided in lengths from 6 mm to 14 mm in 2 mm increments, and are color-coded for accurate and efficient installation.

U Plus 90 Instrumentation System

U Plus 90 Adds Power for Efficiency

The U Plus 90 system provides a comprehensive solution to plating ribs in limited access locations. The low-profile and 90° instrumentation facilitates fixation of subscapular, posterior, and anterolateral fractures through minimally invasive approaches.

The U Plus 90 degree system is designed for low-profile access while allowing the use of power to compress, drill, and install screws – all with efficiency.

U Plus 90 Primary Guides

The U Plus 90 low-profile Primary Guides compress the plate to the rib while aiding in fracture reduction through minimally invasive procedures. This innovative guide provides straight-forward color-coded measurements for screw length.

U Plus 90 Ratchets

The 90 Degree Ratchets are designed to tighten screws with little force in hard to access locations.

Handpiece, Motor & Foot Pedal

Get in touch with us

=